Text size
Line height
Text spacing
About the course
Build a basic understanding of electronic components and how simple systems carry information. The proposed foundation course starts with safe observation, diagrams and low-voltage measurements. Southern African examples should use familiar communication devices while distinguishing a learner exercise from installation, repair or operation of a regulated communication service.
What you'll learn
- Recognise common electronic components and explain their basic purpose.
- Read a simple circuit or system diagram.
- Record measurements from an approved low-voltage teaching circuit.
- Explain a communication-system example using clear technical language.
Requirements
- Recommended preparation is functional literacy, numeracy and readiness for supervised practical work. BMIT must confirm the authorised foundation-certificate entry route, any bridging support and recognition of prior learning. No comparator duration, credits, qualification-framework level or examination entitlement is assigned to this proposed outline.
Course content
Sections: 4
•Activities: 1
•Resources: 9
Subjects in this programme
The subjects are grouped by learning stage, from foundations to specialist study and supervised application. Complete earlier foundations before the related advanced work. Clinical, laboratory, field and workplace subjects use approved facilities and supervision appropriate to the programme.
9 subjects are listed below, with a short description of each. The Subject descriptions tab contains the learning outcomes, topics, practical tasks and assessments.
Stage 1: Foundations
- Occupational Safety and Risk. Examine hazard identification, exposure and their relationship within occupational safety and risk. The subject develops risk assessment and hierarchy of controls, then examines incident learning and worker participation. Review an authorised workplace case and propose proportionate controls.
- Technical Numeracy. Develop your understanding of technical numeracy through units and ratios. The subject develops measurement and geometry, then examines graphs and checking calculations. Solve measurements and costing problems from a practical teaching task.
- Electrical and Electronic Fundamentals. Study electrical quantities and components as foundations for electrical and electronic fundamentals. The subject develops simple circuits and signals, then examines measurement and safe limits. Use current-limited low-voltage teaching equipment with supervision.
Stage 2: Technical and applied subjects
- Analogue Electronics. Examine semiconductor behaviour, amplifiers and their relationship within analogue electronics. The subject develops filters and feedback, then examines power supplies and signal quality. Evaluate a current-limited teaching circuit and explain observed signal changes.
- Digital Electronics. Develop your understanding of digital electronics through binary representation and logic gates. The subject develops combinational circuits and sequential circuits, then examines timing and digital interfaces. Implement a small logic function using simulation or approved low-voltage equipment.
- Communication Theory. Study information representation and modulation concepts as foundations for communication theory. The subject develops noise and bandwidth, then examines coding principles and link performance. Compare communication-link simulations using controlled signal conditions.
- Instrumentation Fundamentals. Examine units, sensors and their relationship within instrumentation fundamentals. The subject develops indicators and scales, then examines calibration awareness and reporting. Compare simple instruments on a safe supervised teaching rig.
Stage 3: Supervised practice and integration
- Foundation Practical Project. Develop your understanding of foundation practical project through brief interpretation and preparation. The subject develops supervised execution and quality checking, then examines corrections and reflection. Complete an approved foundation task within the programme practical scope.
- Entrepreneurship and Small Enterprise. Study customer needs and value proposition as foundations for entrepreneurship and small enterprise. The subject develops business models and costs, then examines operations and enterprise risk. Develop a small-enterprise proposal grounded in a defined local need.
Assessment and practical learning
- Proposed assessment: short knowledge checks, calculations and interpretation of technical information.
- Direct observation of authorised practical tasks, supported by an individual record of preparation, results and quality checks.
- An applied project and oral explanation. Weighting, external examinations and award requirements remain subject to the approved BMIT and awarding-body arrangements.
Practical application
Provide current-limited teaching equipment and direct supervision. Learners should check instructions before connecting components and stop when equipment condition is uncertain. Radio transmission requires separate compliance with applicable rules. This foundation proposal does not establish competence to repair mains-powered equipment or service live communication infrastructure.
Subject descriptions
Each subject below includes its purpose, learning outcomes, main topics, practical task and assessment approach.
Occupational Safety and Risk
Stage 1: Foundations
Examine hazard identification, exposure and their relationship within occupational safety and risk. The subject develops risk assessment and hierarchy of controls, then examines incident learning and worker participation. Review an authorised workplace case and propose proportionate controls.
Learning outcomes
- Explain hazard identification and exposure using an appropriate example.
- Analyse a subject-related problem involving risk assessment and hierarchy of controls.
- Present reasoned evidence addressing incident learning and worker participation.
Main topics
- Hazard identification
- Exposure
- Risk assessment
- Hierarchy of controls
- Incident learning
- Worker participation
Practical task
Review an authorised workplace case and propose proportionate controls.
Assessment
Submit a risk assessment and a follow-up evaluation plan.
Technical Numeracy
Stage 1: Foundations
Develop your understanding of technical numeracy through units and ratios. The subject develops measurement and geometry, then examines graphs and checking calculations. Solve measurements and costing problems from a practical teaching task.
Learning outcomes
- Explain units and ratios using an appropriate example.
- Analyse a subject-related problem involving measurement and geometry.
- Present reasoned evidence addressing graphs and checking calculations.
Main topics
- Units
- Ratios
- Measurement
- Geometry
- Graphs
- Checking calculations
Practical task
Solve measurements and costing problems from a practical teaching task.
Assessment
Submit checked calculations with units and a clear explanation.
Electrical and Electronic Fundamentals
Stage 1: Foundations
Study electrical quantities and components as foundations for electrical and electronic fundamentals. The subject develops simple circuits and signals, then examines measurement and safe limits. Use current-limited low-voltage teaching equipment with supervision.
Learning outcomes
- Explain electrical quantities and components using an appropriate example.
- Analyse a subject-related problem involving simple circuits and signals.
- Present reasoned evidence addressing measurement and safe limits.
Main topics
- Electrical quantities
- Components
- Simple circuits
- Signals
- Measurement
- Safe limits
Practical task
Use current-limited low-voltage teaching equipment with supervision.
Assessment
Submit observed practical evidence and basic circuit explanations.
Analogue Electronics
Stage 2: Technical and applied subjects
Examine semiconductor behaviour, amplifiers and their relationship within analogue electronics. The subject develops filters and feedback, then examines power supplies and signal quality. Evaluate a current-limited teaching circuit and explain observed signal changes.
Learning outcomes
- Explain semiconductor behaviour and amplifiers using an appropriate example.
- Analyse a subject-related problem involving filters and feedback.
- Present reasoned evidence addressing power supplies and signal quality.
Main topics
- Semiconductor behaviour
- Amplifiers
- Filters
- Feedback
- Power supplies
- Signal quality
Practical task
Evaluate a current-limited teaching circuit and explain observed signal changes.
Assessment
Submit a circuit report with test evidence.
Digital Electronics
Stage 2: Technical and applied subjects
Develop your understanding of digital electronics through binary representation and logic gates. The subject develops combinational circuits and sequential circuits, then examines timing and digital interfaces. Implement a small logic function using simulation or approved low-voltage equipment.
Learning outcomes
- Explain binary representation and logic gates using an appropriate example.
- Analyse a subject-related problem involving combinational circuits and sequential circuits.
- Present reasoned evidence addressing timing and digital interfaces.
Main topics
- Binary representation
- Logic gates
- Combinational circuits
- Sequential circuits
- Timing
- Digital interfaces
Practical task
Implement a small logic function using simulation or approved low-voltage equipment.
Assessment
Submit a logic design, test cases and timing analysis.
Communication Theory
Stage 2: Technical and applied subjects
Study information representation and modulation concepts as foundations for communication theory. The subject develops noise and bandwidth, then examines coding principles and link performance. Compare communication-link simulations using controlled signal conditions.
Learning outcomes
- Explain information representation and modulation concepts using an appropriate example.
- Analyse a subject-related problem involving noise and bandwidth.
- Present reasoned evidence addressing coding principles and link performance.
Main topics
- Information representation
- Modulation concepts
- Noise
- Bandwidth
- Coding principles
- Link performance
Practical task
Compare communication-link simulations using controlled signal conditions.
Assessment
Submit a link analysis and interpretation of errors.
Instrumentation Fundamentals
Stage 2: Technical and applied subjects
Examine units, sensors and their relationship within instrumentation fundamentals. The subject develops indicators and scales, then examines calibration awareness and reporting. Compare simple instruments on a safe supervised teaching rig.
Learning outcomes
- Explain units and sensors using an appropriate example.
- Analyse a subject-related problem involving indicators and scales.
- Present reasoned evidence addressing calibration awareness and reporting.
Main topics
- Units
- Sensors
- Indicators
- Scales
- Calibration awareness
- Reporting
Practical task
Compare simple instruments on a safe supervised teaching rig.
Assessment
Submit readings, checks and a clear observation report.
Foundation Practical Project
Stage 3: Supervised practice and integration
Develop your understanding of foundation practical project through brief interpretation and preparation. The subject develops supervised execution and quality checking, then examines corrections and reflection. Complete an approved foundation task within the programme practical scope.
Learning outcomes
- Explain brief interpretation and preparation using an appropriate example.
- Analyse a subject-related problem involving supervised execution and quality checking.
- Present reasoned evidence addressing corrections and reflection.
Main topics
- Brief interpretation
- Preparation
- Supervised execution
- Quality checking
- Corrections
- Reflection
Practical task
Complete an approved foundation task within the programme practical scope.
Assessment
Submit the finished work, observed competence record and explanation of corrections.
Entrepreneurship and Small Enterprise
Stage 3: Supervised practice and integration
Study customer needs and value proposition as foundations for entrepreneurship and small enterprise. The subject develops business models and costs, then examines operations and enterprise risk. Develop a small-enterprise proposal grounded in a defined local need.
Learning outcomes
- Explain customer needs and value proposition using an appropriate example.
- Analyse a subject-related problem involving business models and costs.
- Present reasoned evidence addressing operations and enterprise risk.
Main topics
- Customer needs
- Value proposition
- Business models
- Costs
- Operations
- Enterprise risk
Practical task
Develop a small-enterprise proposal grounded in a defined local need.
Assessment
Submit a feasible business concept, budget and implementation outline.
Instructors
Enrolment options
NFC in Electronic Communication Systems
Course modified date: 13 September 2026
Build a basic understanding of electronic components and how simple systems carry information. The proposed foundation course starts with safe observation, diagrams and low-voltage measurements. Southern African examples should use familiar communication devices while distinguishing a learner exercise from installation, repair or operation of a regulated communication service.
- Teacher: ImfundoSpace Administrator
- Enrolled students: There are no students enrolled in this course.
Guests cannot access this course. Please log in.
This course includes
Forums
Resources